EN-Labs M.2NVMe & NGFF Duplicator Cloner Docking Station Dual-Bay 20Gbps USB C to PCIe M Key / SATA-based B+M Key NGFF SSD Dock Enclosure,Supports...

EN-Labs M.2NVMe & NGFF Duplicator Cloner Docking Station Dual-Bay 20Gbps USB C to PCIe M Key / SATA-based B+M Key NGFF SSD Dock Enclosure,Supports 22110 / 2280 / 2260 / 2242 / 2230 Compatibility: Motherboard Chipsets Features: Fit for raspberry Pi B+,Pi2 B,Pi 3 ,set of 3 heatsinks These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions:...