for Corsair 90° Angled 12VHPWR Cable Dual 8 Pin to 16 Pin 12V-2x6 PCIe 5.0 GPU Power Cord, 16AWG 600W, Type B (4-Pin on Top Design) for RTX...

CORSAIR TYPE B CONFIGURATION 4-PIN ON TOP DESIGN This cable features the official Corsair Type B configuration, with the 4-pin sense wires positioned on the top side of the connector (closer to the GPU backplate). This design is specifically optimized for graphics cards with components or capacitors below the power connector, ensuring full insertion without interference. Available in two versionsType A (4-Pin on Bottom) and Type B (4-Pin on Top)giving you the freedom to route the cable above or below your graphics card for the perfect fit in your build. 90° ANGLED CONNECTOR PREVENTS SHARP BENDS The factory-molded 90° angled 12V-2x6 connector eliminates the need to bend cables near the GPU portthe #1 cause of connector failure. Standard straight cables often require sharp bends that press against glass side panels; our angled design routes the cable cleanly upward, reducing stress on both the GPU port and your case. It is recommended to maintain at least 35mm of straight cable before any bend. 600W POWER DELIVERY RTX 50 & 40 SERIES READY Built to power the most demanding graphics cards. This cable delivers up to 600W of stable power through two PCIe 8-pin inputs on your Corsair PSU. Fully compatible with NVIDIA GeForce RTX 50 Series (5090/5080/5070 Ti) and RTX 40 Series (4090/4080/4070 Ti). Supports both 12VHPWR and the updated 12V-2x6 GPU connector standardsthe cable works with both, as the difference lies in the GPU-side socket.