"Little Man" Boat Shuttles

Click on the thumbnail for a larger image and more information.

Warping Paddles in two sizes:

• 12 inches long with 18 holes
• 14 inches long with 24 holes

Made from hard wood, finely sanded but no oil finish applied. Comfortable to hold, use less than the maximum if you wish.

This is the paddle shown on the cover of Peggy Osterkamp's book "New Guide to Weaving: Winding a Warp & Using a Paddle".

This Swedish brass and steel bobbin winder has been designed to provide many, many years of dependable service. The winding ratio is about 17.75:1 which means you can wind your bobbins faster and with less effort so you can get back to weaving sooner.

An occasional light oiling will keep this bobbin winder working like new. This bobbin winder has a built-in clamp so you can mount it just about anywhere.

The Kromski "Harp" Rigid Heddle Loom comes standard with a 10 dpi reed. Kromski reeds are also available in 8 or 12 dpi.

Want to weave a finer sett? Use two rigid heddle reed to double your effective threads per inch. For example; Use two 10 dpi reeds together to weave at 20 epi. The "second heddle mounting kit" is listed with the rigid heddle looms.

Want to weave with 5, 7.5, or 12.5 dpi reeds now, call us.

Schacht makes some of the best reasonably priced stick shuttles. All are 1 1/2" wide and 3/16" thick and made from maple. Lengths are as stated.

Hand made for the discriminating weaver from a variety of woods. . Overall length varies from five to six inches (most are closer to six inches) inches. Six teeth, approximately 1.5" wide.

The McMorran Yarn Balance, just the tool you have been searching for. Determine how many yards per pound is in that unknown yarn so you'll know if you have enough to complete your project.

Easy to use! Amazingly accurate!

Warping Pegs are the simplest and most portable warp measuring tools. Clamp to a table or counter; the single peg placed at one end of the warp length and the pair of pegs placed at the other end, spread as far apart as the warp is long.

The Schacht Loom Bench is a beautiful companion piece for the Schacht Wolf looms and Standard floor looms - or any loom for that matter. The bench seat is adjustable from 19" to 24" and has been designed to offer you both a flat and a slanted seat position. The bench is free of side posts, which allow you to move around unrestricted.

Texsolv Polyester Linked-Loop Cord & Pegs

The perfect cord for replacing the rope or cord on your loom. There are holes every half-inch in the cord making adjusting very easy(Beam-cord. . . about every 1 inch).